Laserfiche WebLink
all in a manner prescribed by the City Code, the laws of the State of <br /> Minnesota, and current State Electrical Codes. <br /> Subd. 4. Minimal Thermal Standards. Heating facilities properly installed, <br /> maintained in safe and good working condition, capable of safely and <br /> Adequately heating all habitable rooms, bathrooms, and toilet rooms to a <br /> temperature of at least 68 degrees Fahrenheit at a distance three feet above <br /> floor level and three feet from exterior walls at an outside temperature of -25 <br /> degrees Fahrenheit. Gas or electric appliance designed primarily for cooking <br /> or water heating purposes will not be considered as heating facilities, and <br /> portable heating equipment is prohibited. No space heater employing a flame <br /> that is not vented outside the structure in an approved manner is prohibited. <br /> Section 355:80 General Requirements. No person may occupy or let to another for <br /> occupancy any dwelling or dwelling unit which does not comply with the following: <br /> Subd. 1. Foundations, Exterior Walls and Roofs. The foundation, exterior <br /> walls and exterior roof must be substantially water tight and protected against <br /> vermin and rodents and in sound condition and repair. The foundation <br /> must adequately support the building at all points. Every exterior wall must <br /> be free of deterioration, holes, breaks, loose or rotting boards or timbers, and <br /> any other condition which might admit rain or dampness to the interior <br /> portion of the walls or to the exterior spaces of the dwelling. The roof must <br /> be tight and have no defects which admit rain, and roof drainage must be <br /> adequate to prevent rain water from causing dampness in the walls. All <br /> exterior wood surfaces, other than decay resistant woods, must be protected <br /> from the elements and decay by paint or other protective covering or <br /> treatment, and painting is required if 25% or more of the exterior surface is <br /> unpainted or determined by the Compliance Official to be paint blistered. If <br /> 25% or more of the exterior surface of the painting of any brick, block or stone <br /> wall is loose or has fallen out, the surface must be repaired. <br /> Subd. 2. Windows, Doors and Screens. Every window, exterior door, and <br /> hatchway must be substantially tight and in sound condition and repair. <br /> Every window, other than a fixed window or storm window, must be capable <br /> of being easily opened. Every window, door and frame must be constructed <br /> and maintained in such relation to the adjacent wall construction as to <br /> completely exclude rain, wind, vermin and rodents from entering the <br /> building. Every openable window or other device must be supplied with <br /> mesh screens during the insect season of a mesh size provided for in the <br /> Uniform Building Code. <br /> Subd. 3. Floors, Interior Walls and Ceilings. Every floor, interior wall, and <br /> ceiling must be adequately protected against the passage and harborage of <br /> -11- <br />