PL PACKET 01131989 - Laserfiche WebLink

Home Browse Search

6. INSTALLATION a. There are 3 rows of SGR-8961 extruded aluminum channels embedded in the background, 13" inches center to center running the full length of the sign area. b. The letters are to be attached to those channels using SGR-8960 snap- in clips furnished by the sign .contractor. (Except for the letter I, all letters shall have a 'minimum of three clips, although more clips may be required, depending upon the size of the letter.) c. No letter attachment holes through the SGR-8961 channels and no welding to those channels will be permitted. 7. ELECTRICAL REQUIREMENTS a. Letter shall be internally illuminated with neon tubing, 15 MM, or 13MM using 30 MA transformers. b. The required transformers shall be mounted on the back side of the fascia directly behind the letter and housed in a sheet metal box 0" X 7" X 18". The secondary wiring (GTO-15) running from the transformer to a letter will be contained in 1/2 OD flexible vinyl tubing with no less than .060 inch wall thickness. That tubing shall be mechanically fastened to both the transformer box and the back of • the letter track, by the use of Thomas and Betts 3/8 inch squeeze type connector #253, or equal. C. No holes shall be drilled in the SGR-8961 channel for any purpose except for running secondary wiring from the letter to the transformer. Those holes shall be 7/8 inches in diameter in order that, at a later date, they may be plugged with a standard snapin blank for 1/2 inch knock outs, Appleton #S50 or equal. e. NO PENETRATIONS OF ATTACHMENTS IN THE FINISHED FASCIA SURFACE WILL BE PERMITTED UNDER ANY CIRCUMSTANCES. 8. APPROVAL Tenant shall submit two (2) drawings to the Lessor for written approval, prior to the fabrication of any sign. Lessor must also approve Tenant's Sign Contractor as having previously met the criteria for performing acceptable job standards over a period of not less than three years to assure compliance with our specifications. Any construction accomplished by the Tenant or Sign Contractor, without having the Lessor's written approval and not in compliance with these specifications will be done at the Tenant's own risk. Tenants are. free to select any Sign Contractor they choose, subject to Lessor's approval. Lessor suggests that Tenants select Sign Contractors willing to give acceptable warranties on their work.