2005.07.05 RESO 2005-0037 - Laserfiche WebLink

Home

Resolution 2005-37 Page 2 2. The items identified in the June 27, 2005 City Engineer's memo must be addressed. 3. The development agreement must be executed by the developer and the City prior to release of the final plat. 4. Development standards shall be according to the PUD general plan and preliminary plat approvals granted by the City Council on February 22, 2005, and as may be amended. 5. Park dedication requirements for this site have been met with previous additions. No additional park dedication is required for this phase. 6. The developer must obtain preliminary plat approval from Washington County and comply will all conditions of plat approval. FURTHER, that a PUD final plan must be submitted for administrative review and approval prior to issuance of building permits. The following conditions must be addressed in the PUD final plan application: 1. The developer shall provide a project phasing plan for the entire 46.43 -acre site. 2. At the time of final plat approval for each phase of the development, the applicant shall submit final development plans for the review and approval of the City staff. 3. All platted townhome lots (including twinhomes) shall comply with the following setbacks: Front yard (from public street) 15 feet Between buildings 20 feet Setback around the perimeter of the site (exterior property lines) 30 feet From commercial property line 15 feet Required parking for townhomes (including garage stalls) 2.5 stalls per unit 4. All townhome buildings must be sprinklered. Twinhome buildings are not required to be sprinklered. 5. Architecture a. The plans shall be revised to identify the location of the mailboxes for the townhomes. The mailboxes must be architecturally compatible with the homes in the development. The applicant must submit final plans for review and approval by the City.