Laserfiche WebLink
New Commodity Storage (warehousing) <br />24,000 <br />1 per 1,000 SF of floor area <br />24 <br />New Millwork Building (light <br />manufacturing) <br />21,000 <br />1 per 350 SF of floor area <br />60 <br />Shade Structure (sales)1 <br />1,632 <br />1 per 350 SF of floor area <br />5 <br />Plant House (sales)' <br />1,008 <br />1 per 350 SF of floor area <br />3 <br />TOTAL <br />251 <br />NOTES: ' Reduced requirement appl'ed to bulk retail sales. <br />Additional spaces required for company -owned vehicles parked outdoors. <br />According to the submitted site plan, a total of 284 off - street parking stalls have been <br />provided on site (including parking for ten employee stalls south of millwork assembly <br />building). As such, an ample supply of off - street parking exists on site to accommodate <br />anticipated off - street parking demand. <br />Handicap Parking. According to State American Disability Act requirements, a total of <br />seven off - street parking stalls devoted to handicap use must be provided upon the subject <br />site (for parking ranges 201 to 300 stalls). Currently, only four handicap stalls exist on <br />site. As a condition of CUP /PUD amendment approval, an additional three handicap <br />parking stalls must be provided. <br />Surfacing. According to the submitted site plan, the rear yard area of the property (south <br />of proposed millwork assembly building) is to be surfaced with six inch crushed rock. <br />While this area of the site is not accessible to the general public, it is available to facility <br />employees for off- street parking purposes (ten stalls proposed south of millwork building). <br />As a condition of PUD /CUP amendment approval, all areas of the site utilized for off - street <br />parking and common ingress and egress of vehicles should be surfaced in asphalt, <br />bituminous, or concrete. <br />Structure Height. According to the submitted building elevation, the new warehouse <br />building is to measure 21 feet in height, well within the maximum 36 foot requirement <br />imposed in the B -W District. While assumed, it should be demonstrated that the proposed <br />millwork assembly building also complies with the referenced height requirement. <br />Lighting. As a result of the proposed building expansion, a number of new or relocated <br />lights are to be erected upon the site. All site lighting should be hooded and directed to <br />reflect light away from adjacent properties and public rights -of -way. <br />3 <br />Page 108 <br />