Laserfiche WebLink
MTC CONTRACT NO, <br />DRAFT 7/26/93 <br />3.2 EXISTING POLE WITHOUT BUS STOP SIGN <br />3.2.1 The City shall provide and install all new mounting hardware. <br />3.2.2 The City shall install the MTC furnished nylon washer against the <br />reflective front face of the new bus stop sign. <br />3.2.3 The City shall provide a stainless steel or rust protected washer <br />with the same (or slightly smaller dimensions) as the MTC furnished <br />nylon washer. This metal washer shall be installed by the City <br />between all nylon washers and bolt heads. <br />3.2.4 The City shall install the new bus stop sign. <br />3.3 NON - EXISTING POLE <br />3.3.1 The City shall provide and install a new city pole or channel post, <br />complete, located in accordance with Exhibit A of the Interagency <br />Maintenance Agreement Regarding Bus Service, Bus Zones, and Bus <br />Stop Signs. <br />3.3.2 The City shall provide and install all new mounting hardware. <br />3.3.3 The City shall install the MTC furnished nylon washer against the <br />reflective front face of the new bus stop sign. <br />3.3.4 The City shall provide a stainless steel or rust protected washer <br />with the same (or slightly smaller dimensions) as the MTC provided <br />nylon washer. This metal washer shall be installed by the City <br />between all nylon washers and bolt heads. <br />3.3.5 The City shall install the new bus stop sign. <br />3.4 HOLDER <br />3.4.1 The City shall install the blank bus stop route number and <br />destination holders furnished by MTC for designated bus stops. See <br />drawing, Attachment No. 2, for location on post. <br />MTC CAPITAL IMPROVEMENT AGREEMENT <br />EXHIBIT D <br />Page 138 <br />