Laserfiche WebLink
b. Light sources shall not be permitted so as to light adjacent property in excess of <br />the maximum intensity defined in § 1007.043 (6)(d) of this Ordinance. <br />c. Architectural/historical light fixtures that feature globes that are not shielded, or <br />lighting of entire facades or architectural features of a building may be approved <br />by the City Council. In no case shall the light affect adjacent property in excess of <br />the maximum intensity defined in § 1007.043 (6)(d) of this Ordinance. <br />d. The maximum height of the fixture and pole above the ground grade permitted for <br />light sources is thirty (30) feet. A light source mounted on a building shall not <br />exceed the height of the building. In no case shall the height of a light source <br />mounted on a pole or on a building exceed the height limits of the zoning district <br />in which the use is located, unless allowed by conditional use permit. <br />e. The light source of an outdoor light fixture shall be set back a minimum of ten <br />(10) feet from a street right-of-way and five (5) feet from an interior side or rear <br />lot line. <br />f. No light source shall be located on the roof unless said light enhances the <br />architectural features of the building and is approved by administrative permit. <br />g. The use of outdoor lighting for parking lots serving commercial and industrial <br />businesses shall be turned off one (1) hour after closing, except for approved <br />security lighting. <br />h. All illuminated on -premise signs for advertising purposes shall be turned off <br />between 12:00 AM and sunrise except that said signs may be illuminated while <br />the business facility on the premise is open for service. <br />i. Direct or reflected glare from high temperature processes such as combustion or <br />welding shall not be visible from any adjoining property. <br />The applicant did provide a photometric plan, but did not provide fixture details for the proposed <br />lighting. While the plan generally appears to be in compliance with ordinance standards, fixture <br />details must be provided. <br />Subdivision Ordinance <br />Conformity with the Comprehensive Plan and Zoning Code <br />The preliminary plat is consistent with the district standards for the LI and GB districts as noted <br />above. As noted above, the applicant is required to obtain the full right-of-way or easement for <br />21 st Avenue. <br />9 <br />