Laserfiche WebLink
<br />{00149157 12} 10. <br />e. One of the following three architectural features shall be incorporated into the <br />single family home side and rear elevations that are visible from 20th Avenue <br />(CSAH 54), 21st Avenue North and the Public Park: <br />i. A minimum of 4 inch window trim on side and/or rear elevations to match the <br />dimensions of the front elevation. <br />ii. Incorporate trim and banding in complementary colors to add interest and <br />variety to the side and/or rear elevations. <br />iii. Incorporate more than one exterior material and/or style on the side and/or rear <br />elevation. <br />f. Garages. All single family homes shall have, at a minimum, a double garage and <br />shall comply with the following: <br />i. Compliance with the Building Type and Construction Standards of §1007.043 <br />of City Code (2), and <br />ii. All garages, except side or rear loaded garages, shall not protrude forward of <br />the front wall of the house, unless the house includes a front porch that is <br />unenclosed, a minimum of 6 feet in depth, and extends across 100 percent of <br />the front façade of the house. The garage shall then not protrude forward of the <br />front porch more than 6 feet, and <br />iii. If the garage door faces the street, the length of the garage wall facing the street <br />shall not be greater than fifty-five percent (55%) of the length of the entire front <br />facade of the structure; except on houses that comply with all of the following <br />conditions: <br />a) The second floor living space extends over the two-car portion of <br />the garage; and <br />b) The garage doors are decorative and have a strip of windows; and <br />c) Garages in excess of two stalls shall be broken up so the additional <br />stalls are recessed two feet from the main garage façade; and <br />d) Garage width does not exceed 32 feet except on four stall garages. <br />g. Townhome minimum standards: <br />i. A minimum of three (3) unique building facades for each elevation of the <br />townhomes shall be provided. <br />ii. A table of architectural façade data shall be included for each building <br />elevation. <br />iii. A unique and separate building color package shall be included for each phase <br />of development. <br />iv. At no point shall the same color package be specified on buildings that are <br />immediately adjacent to or directly across the road from each other. <br />v. A minimum of 4 inch window trim on side and/or rear elevations to match the <br />dimensions of the front elevation. <br />vi. In no case shall any of the required exterior materials or styles per elevation be <br />less than 10%. Any additional exterior materials and/or styles included on an <br />elevation that exceeds the minimum requirement do not need to meet the 10 % <br />requirement. <br />vii. Front elevations shall include brick, stone or similar engineered product. The <br />front elevations shall also include 2 other exterior materials, or 1 other exterior <br />material and 2 styles. Exterior materials and styles are defined above.