Laserfiche WebLink
ORDINANCE NO. 51 Page -7- <br />1. Industrial Park Districts: In the Industrial Park Districts all signs <br />must comply with the following: <br />I. Area Identification (planned development to a certain size stand- <br />ard). <br />a) Pylon sign up to 400 square feet per side of sign area; one <br />per major thoroughfare. <br />b) Not to exceed building height limit of zone. <br />c) Minimum 20 foot setback from property line. <br />2. Institutional or Office Building Identification: <br />a) Ground sign up to 100 square feet of sign area with minimum <br />20 foot setback from property line. <br />b) Wall sign up to 20% of the building face. <br />c) Not to exceed building height limit of zone. <br />d) Minimum 20 foot setback from property line. <br />3. Advertising Signs: <br />a) Allowed by special use permit. <br />b) Observe minimum building setback line or 20 feet; whichever <br />is greater. <br />c) Not to exceed building height limit of the zone. <br />d) Must comply with general Regulations. <br />J. General Industrial Districts: In the General Industrial Districts all signs <br />must comply with the following: <br />I. Area Identification: <br />a) Pylon sign up to 400 square feet per side of sign area. <br />b) Not to exceed building height limit of zone. <br />c) Minimum of 20 foot setback from property line. <br />2. Business Identification: <br />a) Sign area of all business signs on a site equals three square <br />feet per lineal foot of lot frontage, or 300 square feet, <br />or twenty - five percent of the wall area on which the sign <br />is placed, whichever is greater. <br />b) Minimum 20 foot setback from property line. <br />3. Advertising Signs: <br />