08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. The materials used in construction of the seat shall also have successfully completed testing with regard to the flammability of materials used in the occupant compartments of motor vehicles as outlined in FMVSS 302, of which dictates the allowable burning rate of materials in the occupant compartments of motor vehicles. SEAT BACK OFFICER The officer's seat back shall include an IMMI brand SmartDock® Gen 2 hands -free self contained breathing apparatus (SCBA) holder. The hands -free holder shall meet NFPA 1901-03 9G dynamic requirements for cylinder restraint systems for use in crew compartments of emergency response vehicles. The bracket shall accommodate and secure most types of self-contained breathing apparatus cylinders. The hands -free holder shall consist of a back plate, bottom cradle, non -marring top claws, and claw height adjustment knob. The height adjustment knob shall allow for easy adjustment of the claws to the SCBA. The hands -free holder's claws shall lock from inertial forces to prevent the SCBA from becoming a projectile in the event of a crash to meet the NFPA 1901-03 standard for SCBA retention. The SCBA holder shall offer single -motion insertion into the claws and hands -free release when the SCBA fitted seat occupant rises. The seat back shall include a removable padded cover which shall be provided over the SCBA cavity. SEAT MOUNTING OFFICER The officer's seat shall be installed in an ergonomic position in relation to the cab dash. SEAT BELT ORIENTATION CREW The crew position seat belts shall follow the standard orientation which extends from the outboard shoulder extending to the inboard hip. SEAT REAR FACING OUTER LOCATION The crew area shall include two (2) rear facing crew seats, which include one (1) located directly behind the left side front seat and one (1) located directly behind the right side front seat. SEAT CREW REAR FACING OUTER The crew area shall include a seat in the rear facing outboard position which shall be a H.O. Bostrom 500 Series Firefighter model seat. The seat shall feature a tapered and padded seat, and cushion. The seat shall be mounted in a fixed position. The seat shall feature an all belts to seat (ABTS) style of safety restraint. The ABTS feature shall include a three-point shoulder harness with the lap belt and automatic retractor as an integral part of the seat assembly. The buckle portion of the seat belt shall extend from the seat base towards the driver position within easy reach of the occupant. The ABTS feature shall also include the RiteHiteTM shoulder adjustment feature to provide enhanced comfort and safety by allowing customized seat belt fit. The minimum vertical dimension from the seat H-point to the ceiling for this belted seating position shall be 35.00 inches. 07/26/22 -46-