08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. position within easy reach of the occupant. The ABTS feature shall also include the RiteHiteTM shoulder adjustment feature to provide enhanced comfort and safety by allowing customized seat belt fit. The minimum vertical dimension from the seat H-point to the ceiling for each belted seating position shall be 35.00 inches. This model of seat shall have successfully completed the static load tests by FMVSS 207/210. This testing shall include a simultaneous forward load of 3000 pounds each on the lap and shoulder belts and twenty (20) times the weight through the center of gravity. This model of seat installed in the cab model, as specified, shall have successfully completed the dynamic sled testing using FMVSS 208 as a guide with the following accommodations. In order to reflect the larger size outfitted firefighters, the test dummy used shall be a 95th percentile hybrid III male weighing 225 pounds rather than the 50th percentile male dummy weighing 165 pounds as referenced in FMVSS 208. The model of seats shall also have successfully completed the flammability of materials used in the occupant compartments of motor vehicles as outlined in FMVSS 302, of which decides the burning rate of materials in the occupant compartments of motor vehicles. SEAT BACK REAR FACING CENTER The crew area seat backs shall include an IMMI brand SmartDock® Gen 2 hands -free self contained breathing apparatus (SCBA) holder. The hands -free holder shall meet NFPA 1901-03 9G dynamic requirements for cylinder restraint systems for use in crew compartments of emergency response vehicles. The bracket shall accommodate and secure most types of self-contained breathing apparatus cylinders. The hands -free holder shall consist of a back plate, bottom cradle, non -marring top claws, and claw height adjustment knob. The height adjustment knob shall allow for easy adjustment of the claws to the SCBA. The hands -free holder's claws shall lock from inertial forces to prevent the SCBA from becoming a projectile in the event of a crash to meet the NFPA 1901-03 standard for SCBA retention. The SCBA holder shall offer single -motion insertion into the claws and hands -free release when the SCBA fitted seat occupant rises. The seat back shall include a removable padded cover which shall be provided over the SCBA cavity. SEAT MOUNTING REAR FACING CENTER The rear facing center seat shall be mounted facing the rear of the cab. SEAT FRAME REAR FACING CENTER The rear facing center seating shall include a seat frame which is located and installed behind the engine tunnel. The seat frame shall measure 46.15 inches wide X 12.00 inches high X 15.88 inches deep The seat frame shall be constructed of 0.19 inch thick Marine Grade 5052-H32 smooth aluminum plate. The seat box shall be painted with the same color as the remaining interior. SEAT FRAME REAR FACING CENTER STORAGE ACCESS The rear facing center seat frame shall include a storage access opening which shall measure 32.00 inches wide X 8.75 inches high to allow access within the seat frame for storage. A solid access door shall be provided at the opening. 07/26/22 -48-