Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />When the doors are unlocked using the external keypad or the key fobs the interior dome lights shall <br />illuminate and remain on for a period of twenty (20) seconds. The interior dome safety feature shall <br />require the interior lighting power to be battery direct. <br />Wiring shall also be provided for up to four (4) exterior cab compartments and up to four (4) body <br />compartments. <br />DOOR LOCK LH REAR CAB COMPARTMENT <br />The left hand side rear compartment shall feature a power door lock actuator. <br />DOOR LOCK RH REAR CAB COMPARTMENT <br />The right hand side rear compartment shall feature a power door lock actuator. <br />POWER DOOR LOCK COMPARTMENT ACTIVATION <br />The power door lock feature shall include activation for exterior compartment door locks through the key <br />fob, keypads and through a virtual switch on the multiplex display. <br />GRAB HANDLES <br />The cab shall include one (1) 18.00 inch knurled, anti -slip, one-piece exterior assist handle behind each <br />cab door. The grab handle shall be made of SAE 304 stainless steel and be 1.25 inch diameter to enable <br />non -slip assistance with a gloved hand. <br />REARVIEW MIRRORS <br />The cab exterior shall include Ramco bus style mirrors, one (1) mounted on the drivers' door and one (1) <br />mounted on the right front cab corner radius below the windshield. <br />The left side mirror shall be model CRM-310-1750-TPCHR. The mirror head shall be injection molded <br />chrome plated ABS plastic that measures 9.50 inches wide X 17.50 inches high and is mounted with a <br />polished die-cast aluminum arm. <br />The right side mirror shall be model CRM-310-1752-A10-TPCHR. The mirror head shall be injection <br />molded chrome plated ABS plastic that measures 9.50 inches wide X 17.50 inches high and is mounted <br />with a 19.00 inch long polished cast aluminum arm. <br />Both the flat and convex mirrors shall be heated and remote controlled. The mirror control switches shall <br />be located within easy reach of the driver. The mirrors shall be manufactured using the finest quality <br />non -glare glass and shall feature a rigid mounting thereby reducing vibration. The mirrors shall be <br />corrosion free under all weather conditions. <br />REARVIEW MIRROR HEAT SWITCH <br />The heat for the rearview mirrors shall be controlled through a rocker switch on the dash in the switch <br />panel. <br />TRIM LOWER SIDE <br />A stainless steel trim band, 10.00 inches high, with upper and lower black and chrome trim moldings, <br />shall be installed on the lower exterior sides of the cab and doors. The trim shall be installed so that the <br />07/26/22 <br />-50- <br />