Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />Two (2) speed -lay 2" gated discharge to be provided with: 1.5" NST male outlet x 2" inlet 90 degree <br />bronze or stainless steel overhead discharge swivel, hose line bleeder valve, 2" i.d. stainless steel pipe or <br />wire reinforced hose with 2" stainless end fittings, 2.5" Waterous 1/4-turn discharge valve with chrome <br />plated ball and spring loaded self-adjusting seal assembly (located inside pump compartment), and <br />push-pull chrome "twist -to -lock" discharge control handle with recessed color coded nameplate located <br />on the pump operator's control panel. <br />SPEED -LAY HOSE RESTRAINT <br />Open ends of speedlays shall be equipped with cargo web closures. Closures shall consist of 1" wide <br />nylon sewn into a 1" x 1" grid. Closure shall be fastened along bottom by awning rail and it upper <br />corners by shock cord and hooks. <br />BLEEDER VALVE AND DRAIN VALVE CONTROL PANELS <br />The passenger side and driver side gated discharge outlets and suction inlets bleeder valves shall be back <br />side mounted to a brushed stainless steel horizontal full width bolt -on riser panel, located immediately <br />above the pump panel running boards. Bleeder and drain valve controls shall be located evenly spaced, in <br />a single horizontal row, on the exterior side of the riser panels. <br />The top portion of the driver and passenger side exterior pump panels, below the crew cab side window <br />units, shall be fabricated of brushed stainless steel, bolted in position and easily removable. This header <br />panel is to be of the minimum height necessary to accommodate overhead pump panel light fixtures. <br />REMOVABLE SIDE PUMP ACCESS PANELS <br />Driver and Passenger sides of pump module shall incorporate brushed stainless steel removable panels, <br />removal of which allows for total pump access, above and below the chassis frame levels, and full width <br />of the pump module. <br />The removable side panels shall be located above and interlock with the driver and passenger side <br />bleeder and drain valve control panels. Each removable side panel shall be held in place by four (4) <br />outboard corner mounted chrome plated quick release push-button trigger latches, and shall be equipped <br />with two (2) chrome plated grab handles to aid in the removal and re -installation of the panel. Removable <br />side panels shall mate "flush" with the horizontal bleeder/drain riser panel and overhead header panel, <br />and overlay onto brushed stainless steel side flanges thus eliminating the possibility of dissimilar metals <br />corrosion. <br />Removal of the passenger and driver side trigger -latched panels shall provide an unobstructed opening, <br />allowing access to and removal of all side discharge and suction gate valves and fittings. <br />Specified suction and discharge closures and elbow adapters shall allow for disassembly for complete <br />removal of overlay inserts. <br />07/26/22 <br />-85- <br />