Laserfiche WebLink
Custom Fire Apparatus, Inc. <br />The specified individual discharge control engraved color coded identification name plate's <br />nomenclature shall, describe: the physical location of outlet, the size of hose to be attached, and the type <br />of discharge. <br />Where an outlet is Foam Capable, the name plate shall so describe. <br />DISCHARGE OUTLET NAME PLATES <br />Individual Discharge Outlet name plates are to be provided adjacent to the outlet or hose bed. <br />Outlet name plates are to be of the same color as the discharge valve control name plate, pressure <br />instrument/gauge name plate, and the bleeder valve control name plate. <br />COLOR CODED DISCHARGE AND SUCTION NAME PLATES <br />The name plates, as provided for identification of the following devices, are to be permanently printed on <br />a colored background with nomenclature as specified above, attached with permanent adhesive, NOTE: <br />Name plates are not to be screwed or riveted in position. <br />Color matching name plates are to be provided for: Suction Inlet, Suction Control (when gated), Suction <br />Bleeder, Discharge Outlet, Discharge Control, Discharge Pressure Instrument, and Discharge Bleeder <br />Control. <br />ELECTRIC DISCHARGE VALVE CONTROL CONSOLE(S) <br />Three (3) Waterous Electric Valve Control Console(s) are to be located on the pump operator's panel. <br />BRUSHED STAINLESS "TILTING" INSTRUMENT PANEL WITH LIGHT HOOD <br />The specified pump pressure gauges, discharge pressure gauges, and engine monitors/ instruments shall <br />be installed on a brushed stainless steel hinged gauge panel, located above and to rear of pump control <br />panel. The gauge panel is to be equipped with two adjustable -grip chrome plated lift -and -turn latches, <br />located in upper corners. Gauge panel to be of the "tilting" style, to allow access to back of gauges and <br />interior fire pump compartment. Overhead full width integral light housing to be furnished. <br />GAUGE AND INSTRUMENT LIGHTING <br />In addition to the interior cab overhead lighting, any non -back lit gauges or instruments shall be provided <br />with overhead 12-volt lighting, to fully illuminate for nighttime operations. Lighting shall be manually <br />switched. <br />PUMP SYSTEM ELECTRICAL <br />All pump compartment wiring for specified 12-volt electrical equipment is to be suitably protected inside <br />heat resistant vinyl, forming one or more wiring hamess(es). <br />07/26/22 <br />-88- <br />