Laserfiche WebLink
22 <br />c. Low density residential setback: 25ft < 35ft required <br />7. Building design standards: <br />a. Single Family R-2 (55ft and 65ft wide lots): <br />i. Minimum building footprint: 780sf < 850sf <br />ii. Garage size: 445sf < 520sf <br />iii. Garage protrusion from front porch: 6ft > 0ft <br />iv. Garage/façade ratio: <br />1. 2 story home: 55% garage/45% facade > 50%/50% <br />2. 1 story home: 67% garage/33% façade > 50%/50% <br />v. 3rd stall recess: 1ft < 2ft required <br />b. Townhomes (R-3) <br />i. Garage width: 18ft 1.5in < 20ft <br />ii. Garage size: 379sf < 520sf <br />iii. Exterior stone: 7% < 25% <br />iv. Max. singular exterior finish: 85% (rear) and 94% (side) > 75% <br />allowed <br /> <br />RECOMMENDATION <br /> <br />Staff recommends continuing the public hearing for Peltier Ponds Comprehensive Plan <br />Amendment, Rezoning and PUD Preliminary Plan/Preliminary Plat to allow time to <br />address the outstanding issues including but not limited to: <br /> <br />• Comprehensive plan amendment <br />• Transportation <br />• Water supply concerns <br />• Impervious surface percentage <br />• Architectural standards <br />• Cultural resources assessment <br /> <br />Staff seeks input on the following items: <br /> <br />1. Requested PUD flexibility regarding building design standards? <br />2. Other requested PUD flexibility? <br /> <br />The following is one consideration for preliminary conditions of approval: <br /> <br />1. Preliminary Plat approval is conditioned on the City’s ability to provide water as <br />determined by the City. <br /> <br />The following items shall be addressed with the submittal of the revised PUD <br />Preliminary Plan/Preliminary Plat: <br />