07/13/2005 P&Z Packet - Laserfiche WebLink

Home Search

• • • design standards established in other residential districts. All manufactured Home Parks are required to conform to the provisions of this section and other appropriate sections of the code. f. "R -7" Manufactured Home Subdivision District: Purpose. The purpose of this district is to provide opportunities for manufactured housing for manufactured homes which meet the design criteria established in this subdivision in subdivided developments, in safe, attractive residential neighborhoods with all urban services and desired amenities. R -1, R -1X, R -2, R -3, R -4, R -6, R -7 In the multiple and residential districts, the following requirements apply. 1. Residential Identification: One nameplate per residence, not more than two (2) square feet per unit. 2. Institutional Identification Signs: Not more than one sign per street frontage; one identification sign allowed per building; not more than thirty - two (32) square feet; not higher than six (6) feet; 3. Area Identification Signs: Not more than twenty -four (24) square feet; not higher than six (6) feet. 4. Advertising Signs: Advertising signs, as defined by Section II, Subd. F of Ordinance, are prohibited in the R -1, R -1 X, R -3, R -4, R -6, R -7 Zoning Districts. 5. No sign may be closer than ten (10) feet to any property line. 6. Each property with a resi.dence may have one freestanding sign, temporary or permanent. without a permit: maximum size 6 sq ft, at least 10' from property line This sign shall not advertise commercial activity that is not allowed or conducted on same property as sitm. There is no time limit for such a si an. C. BUSINESS DISTRICTS a. "LB" Limited Business District: Purpose. There may be some areas which are suitable only for commercial uses of a limited (less intense) nature. This may be due to the close proximity of residential uses. Ordinance 05 -05, Sign Ordinance page 6 of 29