04/09/1997 P&Z Minutes - Laserfiche WebLink

Home Search

• • Planning & Zoning Board April 9, 1997 Page 17 Mr. Gelbmann asked what noise factor will be generated by the manufacturing processes of GNW Machine, such as a large air compressor. Mr. Walstrom stated that the shop is a quiet operation, mostly light manufacturing. There are no large presses. It is mostly computer operated equipment. The air compressor is in a fully enclosed area. Mr. Gelbmann expressed concern about lighting reflecting into the neighborhood to the south. He would like to see restrictions in place to keep lighting on the site and not reflected off-site. Mr. Nordness stated that the casted dowel lighting will be directed onto the parking lot, not off it. Mr. Gelbmann stated that this will be a good development for Lino Lakes and expressed his appreciation to GNW for choosing a site in the City. Mr. Dunn made a MOTION to approve the site plan with the stated conditions, and was supported by Mr. Robinson: 1. Proper building permits must be obtained prior to any construction on the site. The building permit shall include a deposit of 1% of construction costs to insure completion of all site improvements. 2. The applicant shall sign a development agreement and post financial guarantees as specified by the City prior to issuance of the building permit. 3. The City Engineer shall review and approve the grading, utility and drainage plans. 4. Roof top heating and ventilating units shall be screened and /or blended with the design and coloring of the building. 5. The parking area shall be supplied with adequate handicapped spaces as provided by the ADA Rules and Regulations. 6. Permits shall be obtained from the RCWD for grading and on -site ponding, if required. 7. Signage shall comply with the City Sign Ordinance and proper permits obtained. • 8. The Developer shall participate in the reconstruction of Cedar Street at a cost to be determined by the City Engineer.