Laserfiche WebLink
2.04 Pre -Coated Sheet Metal: <br />A. Pre -coated metal shall be minimum 24 -gauge commercial quality steel with a hot - <br />dipped, galvanized, primed, and fluoropolymer-type finish. <br />B. Exposed surfaces shall have a "smooth" -type finish with color as selected by <br />Owner from manufacturer's standard. <br />1. All exposed surfaces shall be protected with a stripable plastic -type film. <br />2. Exposed fasteners shall have gasketed, pre -coated heads with matching <br />color. Provide touch-up paint for exposed edges and abraded areas. <br />C. Approved Products: <br />1. Color Klad by Vincent Brass and Aluminum Co. <br />2. Carlisle Metal Products by Carlisle Syntec. <br />3. Pac-Clad by Peterson Aluminum Corp. <br />4. Approved Equal. <br />2.05 Counterflashing at Wall Curbs: <br />A. Counterflashing shall be designed and fabricated in minimum 96 inch lengths <br />where job dimensions allow (lesser lengths at curbs). Skirt member shall be of <br />size indicated with bottom edge folded under 1/2 inch, fabricated in such manner as <br />to hold the bottom firmly against the flashings, and formed to fit field conditions. <br />Skirt members, when installed, shall be securely fastened with gasketed screws <br />and/or fasteners as detailed. <br />B. Coping cover plates shall be 6 inches wide, and counterflashing shall have S -slip <br />end joints provided, as detailed, and be fabricated of same gauge and material as <br />flashing. Furnish complete with a continuous ribbon of flashing sealant as shown <br />on details. <br />2.06 Formed Drip Edge Metal: <br />A. Steel minimum 24 gauge hot dipped galvanized with face coating polyvinylidene <br />fluoride resin -base finish (Kynar 500 or Hylar 5000). <br />B. Form accurately to details. <br />C. Profiles, bends and intersections shall be even and true to line. <br />2.07 Pipe or Vent Jackets: <br />A. Pipe or vent jackets shall be a frost -proof type with a lead cap, and fabricated of <br />galvanized metal designed for use on flat roof construction. Verify at work site <br />for quantity and size. <br />1. 24 gauge galvanized steel base. <br />2. Flashing base shall be at least 18 x 18 inches. <br />Flashing and Sheet Metal <br />07 62 00-4 <br />City of Lino Lakes <br />Lino Lakes Fire Station #1 <br />RSI Project # 15-12120-02 <br />