June 20, 2006 CCP - Laserfiche WebLink

Home Browse Search

3. Construction Phase - Resident Services In addition to the above General Services, TKDA shall provide the services of a Resident Project Representative (and assistants as agreed) at the site to assist TKDA and to provide more continuous observation of the Contractor(s) work. The Resident Project Representative (and any assistants) will be TKDA'S agent or employee and under TKDA'S supervision. Resident Project Representative's dealings in matters pertaining to the on -site work shall in general, be only with TKDA and the Contractor, and dealings with subcontractors shall only be through or with full knowledge of the Contractor. Written communication with the OWNER will be only through or as directed by TKDA. Through the observations of the work in progress and field checks of materials and equipment by the Resident Project Representative, TKDA shall endeavor to provide further protection for the OWNER against defects and deficiencies in the work of the Contractor; but the furnishing of such resident Project representation will not make TKDA responsible for construction means, methods, techniques, sequences or procedures or for safety precautions or programs, or for the Contractor's failure to perform his work in accordance with the Contract Documents. This Authorization provides for up to 72 hours for Construction Observation. III. ADDITIONAL SERVICES If authorized in writing by the OWNER, TKDA shall Runish or obtain from others Additional Services of the types listed below which are not considered as normal or customary services. Additional Services shall be compensated for on an Hourly Rate basis as defined in the General Agreement, a part hereof, and such compensation shall be over and above any maximums or lump sum amounts set forth in this Authorization. A. Registered land or right-of-way surveys, right-of-way mapping; plats; legal descriptions; land appraisals, negotiations and/or related services. B. Investigations of existing conditions or facilities or to make measured Drawings thereof, or to verify the accuracy of Drawings or other information furnished by the OWNER. C. Soil borings and laboratory tests for design purposes; field and/or laboratory tests taken during construction to determine compliance with the Contract Documents. D_ Providing analyses of the OWNER'S needs and programming the requirements of the Project; investigations involving detailed consideration of operations, maintenance and overhead expenses; providing Value Engineering during the course of design; the preparation of cash flow and economic evaluations, rate schedules and appraisals; assistance in obtaining financing for the Project; detailed quantity surveys of material, equipment and labor. -5-