1992.02.18 CC Minutes - Laserfiche WebLink

Home

City Council. meeting of February 18, 1992 Page _ 1. The type of part% improvements requested. The cost of said parte improvements. 3. Annual maintenance of part; improvements 4. Access to the part, from the subdivision vehicular). 5. Working around the wetlands on site. b. The precedent being set by improving and parts. and grounds. developments (pedestrian and maintaining neighborhood 7. Neighborhood involvement in improving and maintaining part: facilities. City Administrator Huber explained current City policy as it relates to its parts, and identified the land owned by the City that is designated for parts. Councilman Miron agreed to wort; with the residents of the subdivision to discuss the issues listed above, and report the results of his meetings for Council consideration. SITE FLAN AP'P'ROVAL ( WILSON TOOL) Mr. Kenneth H. Wilson of Wilson Tool International, Inc., has made application to the City of Hugo for site plan approval to construct two structures on their property identified as 122912 Farnham Avenue, Hugo, MN. The property is located in the Fuld Eagle Industrial Park, is zoned industrial, and consists of approximately 23.2 acres. Wilson Tool wishes to expand its manufacturing facility by adding a 260' x, 170' , and a 100' x 100' concrete block structures to the existing buildings on site. The new structures are to be used as a machine shop and warehouse. The smaller structure involves the enclosing of the previous dock area. The proposal in question is consistent with the overall site development plan previously approved by the City Council. City Administrator Huber reviewed the different construction phases proposed by Wilson Tool. Howard Kuusisto explained the drainage system on site. Mr. John Glenn of Wilson Tool indicated they had no objections to complying with the special conditions of site plan approval. Miron made motion, Stoltzman seconded, to approve the site plan request of Wilson Tool of 12912 Farnham Avenue, by expanding its manufacturing facility by adding a 170' x 260' and 100' x 100' concrete block structures to the existing buildings on site. Approval is subject to the following special conditions: 1. Compliance with all requirements of the RCWD. 2 Compliance with the overall drainage plan for the area, and recommendations of the City Engineer. 3. Development., shall occur consistent with the current proposal, and the phasing and development plan previousIv approved by the City. 4. Further expansion of the proposed structure or development to the west of said structure shall require site plan approval, and must address off-street parting and the extension of Falcon Avenue. 5. All on-sii.e drainage must be consistent with the previously approved drainage plans. 6. Applicant shall clean ponding outlets, as directed by the City Engineer. All aye. Motion Carried.